Diamond Wire Saw Rope for Stone Profiling & Multi-Wire Slab Cutting

Product Overview

CAHARD offers this diamond wire range for two stone-processing applications: profiling and multi-wire slab cutting. The Profiling Series is used for granite and marble profiling, including granite curve cutting and irregular slab cutting. The Multi-Wire Series is designed for granite and marble slab processing.

Each series uses a different combination of bead diameters. The Profiling Series comes in Φ9.0 mm and Φ7.3 mm, while the Multi-Wire Series comes in Φ5.3 mm, Φ6.3 mm and Φ7.3 mm. Since Φ7.3 mm is used in both series, the processing method and machine setup should be identified before the wire is selected.

Applications

Granite Curve & Profile Cutting

The Profiling Series is suitable for granite curve cutting and profile processing where shaped or non-straight cuts are required.

Available bead diameters: Φ9.0 mm / Φ7.3 mm

Choose the diameter according to the profiling machine, workpiece geometry and required cutting profile.

Irregular Slab Cutting

The Profiling Series can also be used for irregular cutting on stone slabs. Wire selection should take the machine setup, workpiece shape and required cutting path into account.

Granite Slab Processing on Multi-Wire Saws

The Multi-Wire Series is designed for granite slab processing on multi-wire saw machines.

Available bead diameters: Φ5.3 mm / Φ6.3 mm / Φ7.3 mm

The required diameter should be matched to the machine setup, number of wires and stone-processing requirements.

Marble Slab Processing on Multi-Wire Saws

The Multi-Wire Series can also be used for marble slab processing. It is listed for multi-wire saw machines configured with 5–72 wires.

Technical Specifications

Multi-Wire Machine Configuration: The Multi-Wire Series is intended for machines configured with 5–72 wires.

Reference Cutting Performance

The following reference values are listed for granite conditions.

Profiling Series — Granite

Multi-Wire Series — Granite

Performance Note: The values above are reference data for granite. For marble, operating parameters should be confirmed according to the stone and machine conditions.

Features

Four Available Bead Diameters

The complete range includes Φ5.3 mm, Φ6.3 mm, Φ7.3 mm and Φ9.0 mm. The available diameter depends on the selected series.

Sintered Diamond Beads

Both the Profiling Series and Multi-Wire Series use sintered diamond beads.

Multi-Wire Saw Compatibility

The Multi-Wire Series is listed for machines configured with 5–72 wires. Machine setup and wire count should be checked when selecting the required diameter.

Φ7.3 mm Used in Both Series

Φ7.3 mm is used in both the Profiling Series and Multi-Wire Series. It should therefore be selected according to the processing method and machine type, rather than by diameter alone.

How to Choose the Right Diamond Wire

Confirm the Processing Method

For curve, profile or irregular slab cutting, choose from the Profiling Series. For granite or marble slab processing on a multi-wire saw, choose from the Multi-Wire Series.

Confirm the Stone Type

Specify whether the material is granite or marble. For granite, include the stone hardness if known.

Select the Bead Diameter by Series

The available diameters are:

• Profiling Series: Φ9.0 mm / Φ7.3 mm
• Multi-Wire Series: Φ5.3 mm / Φ6.3 mm / Φ7.3 mm

Because Φ7.3 mm is used in both series, the application and machine type should be identified before selection.

Confirm the Machine Setup

For profiling applications, provide the machine type or model together with the required profile and workpiece geometry.

For multi-wire applications, provide the machine model and number of wires so the wire can be matched to the saw setup.

Tell Us About Your Stone Processing Requirements

To help CAHARD identify the appropriate diamond wire series and diameter, please provide as much of the following information as possible:

• Stone type: granite or marble
• Stone hardness, if known
• Processing method: profiling or multi-wire slab cutting
• Required bead diameter, if specified
• Machine type and model
• Number of wires for multi-wire applications
• Workpiece dimensions
• Required curve or profile for profiling applications
• Current diamond wire specification, if available
• Required wire length
• Required quantity

For profiling applications, the required profile and workpiece geometry are especially useful for selection. For multi-wire applications, the machine model and number of wires are the key details needed before quotation.